Spring sprinkler startup in Spokane

Turn it on the right way, once the ground thaws. Opening the main valve too fast causes water hammer that cracks cold pipe and valves; we bring the system up slowly and walk every zone.

Sprinklers watering the front lawn of a North Spokane home

A professional spring startup runs $85 to $175 for most Spokane homes as of 2026, depending on system size and how many heads need adjustment. The usual window is April 15 to May 15, after the last hard freeze. Repairs found during startup are billed separately.

What it costs

Standard residential startup$85 to $175
Repairs found during startupBilled separately from the startup

Typical ranges as of 2026 from our own guides. Your technician gives you a good estimate; the final cost depends on what the job turns up. All prices.

What a startup covers

We open the main valve slowly, power up and program the controller, run each zone, check the backflow assembly, and adjust heads so the water lands on lawn instead of the driveway. Cracked heads, split fittings and a freeze-damaged backflow body show up now, not in July.

Spring is also a natural time for the yearly backflow test, since the assembly is being pressurized again.

How it works

  1. Get on the schedule. Mid-April to mid-May, after the last hard freeze.
  2. We bring it up slowly. Main valve, controller, every zone, the backflow assembly.
  3. Green all summer. Heads aimed, schedule set for Spokane's dry summer.
FAQ

Spring startup: questions people ask

When should I turn my sprinklers on in Spokane?

Most years the safe window for a spring startup in Spokane runs from about April 15 to May 15, after the last hard freeze. If snow is still on the ground or overnight lows are dipping below 28 degrees, wait. Open the main valve slowly, over 30 to 60 seconds, to avoid water hammer.

Full answer
How much does a spring sprinkler startup cost in Spokane?

A standard residential spring startup with Revive runs $85 to $175 as of 2026, depending on system size, age and how many heads or zones need adjustment. Repairs found during the startup are billed separately.

Full answer
Why won't my sprinklers turn on?

Start with the controller, its power supply and the main water valve. When the whole system is dead, the cause is usually power, the controller program, or a closed main valve. When just one zone is dead, it is almost always that zone's valve, solenoid or wire. If those checks don't find it, call (509) 986-4262 and a technician will trace it.

Full answer

All questions, answered

Spring startup in Spokane, done right.

Send the form or call (509) 986-4262. The office is open Monday to Friday, 8 AM to 4:30 PM. New systems and additions get a free estimate; repairs and startups are billed by the service call.